Daimler Dingo

From Ford Wiki

Jump to: navigation, search
colspan="2" WPMILHIST Infobox style | Daimler Scout Car
colspan="2" WPMILHIST Infobox style | File:Daimler Scout Car (Dingo).jpg
Type Armored car (military)
Place of origin Flag of the United Kingdom.svg United Kingdom
colspan="2" WPMILHIST Infobox style | Production history
Designer Birmingham Small Arms Company
Manufacturer Daimler
Number built 6,626
colspan="2" WPMILHIST Infobox style | Specifications
Weight 3 tonnes
Length 3.2 m
Width 1.7 m
Height 1.5 m
Crew 2

Vehicle armour up to 30 mm
Primary
armament
.303 in Bren gun or .55 in Boys Anti-tank Rifle
Engine 2.5 litre 6-cyl Daimler Petrol
55 hp (41 kW)
Power/weight 18.3 hp/tonne
Suspension Wheel 4x4
Operational
range
320 km
Speed 88.5 km/h
For the Australian vehicle, see Dingo (scout car)

The Daimler Scout Car, known in service as the "Dingo" (after the Dingo), was a United Kingdom light fast 4WD reconnaissance vehicle also used in the liaison role during the Second World War.

History


Germany soldiers inspect a British Dingo, in Canadian Army service, abandoned during the August 1942 Dieppe Raid.

In 1938 the British War Office issued a specification for a scouting vehicle. Out of three designs submitted by Alvis Cars, Birmingham Small Arms Company and Morris Motor Company, the one by BSA was selected. The actual production was passed to Daimler Motor Company, which was a vehicle manufacturer in the BSA group of companies. The vehicle was officially designated Daimler Scout Car, but became widely known as Dingo, which was the name of the competing Alvis prototype.

Arguably one of the finest Armoured fighting vehicle built in Britain during the war, the Dingo was a small two-man armoured car. It was well protected for its size with 30 mm of armour at the front. The engine was located at the rear of the vehicle. One of the ingenious features of Dingo was the transmission; a Preselector gearbox gearbox and Fluid flywheel that gave five speeds in both directions. Original version had four-wheel steering; however this feature was dropped in Mk II because inexperienced drivers found the vehicle hard to control.

Although the Dingo featured a flat plate beneath the chassis to slide across uneven ground, it was extremely vulnerable to mines. No spare wheel was carried, but it was not really necessary because of the use of Run-flat tire (nearly solid) rubber tyres instead of pneumatic. Despite the hard tyres, the independent suspension gave it a very comfortable ride. A swivelling seat next to the driver allowed the other crew member to attend to the Wireless Set No. 19 or Bren gun when required.

The Dingo was first used by the British Expeditionary Force (World War II) (British 1st Armoured Division and 4th Northumberland Fusilers) during the Battle of France. It turned out to be so successful that no replacement was sought until 1952 with the production of the Daimler Ferret. In mid-70s the Dingo was still used by Cyprus and Portugal.

Variants


Production went through 5 variants which were mostly minor improvements. 6,626 vehicles were produced from 1939 to 1945.

  • Mk I - original model with four-wheel steering and sliding roof.
    • Mk IA - folding roof.
    • Mk IB - reversed engine cooling fan.
  • Mk II - front-wheel steering.
  • Mk III - waterproofed engine, no roof.

A closely related vehicle, the Lynx Scout Car, was produced by Ford Canada in Windsor, Ontario. 3255 units were built.

  • Mk I.
  • Mk II - strengthened chassis, no roof.

Another Dingo clone, the Lince scout car was developed by Lancia, Italy. In 1943-1944, 129 cars were built. They were employed by both Nazi Germany and Italian Social Republic forces.

References and external links


Commonwealth of Nations Armoured fighting vehicle of World War II
Flag of the United Kingdom.svg

WWIIBritishTanks WWIIBritishSelf-propelledArtillery WWIIBritishAPCs WWIIBritishCars WWIIBritishExperimental Military navigation

British armoured fighting vehicle production during World War II

</div>

Personal tools