Ford AXOD transmission

From Ford Wiki

(Redirected from Ford AX4S transmission)
Jump to: navigation, search
AXOD
Automotive industryFord Motor Company
Also calledAXOD-E
AX4N
AX4S
Production1986–2001
Successor6F
Car classification4-speed Transverse engine Automatic transmission Transaxle

The AXOD was a 4-speed Automatic transmission Transaxle for Transverse engine Front wheel drive Automobile from the Ford Motor Company. It was introduced in the 1986 Ford Taurus/Mercury Sable (with the 3.0 L Vulcan V6). The AXOD and its successors are built in Ford's Van Dyke Transmission plant in Sterling Heights, Michigan. Production of the final member of the family, the AX4N, ended in November 2006.

This has a code letter of "T" on the data plate.

Applications:

Contents

AXOD-E


The AXOD was updated with electronic controls in 1991 as the AXOD-E. The electronic shifting and torque converter controls were integrated with the Taurus's electronic control module for smoother shifts.

This had a data plate code of "T" for 1991 and 1992 models, and "L" for 1993.

Applications:

AX4S


The AXOD-E was renamed AX4S in 1994. In addition to the name change, improvements in the lubrication of the gearset and capacity upgrades were made. A centrifugal piston assembly was implemented in the intermediate clutch position to improve 1st-2nd and 2nd-1st shift quality and an increase in the clutch's durability was made on some models. High energy friction materials were also introduced. A new twin piston torque converter clutch (TCC) was introduced with the AX4S and the AX4N on some models.

The data plate code for this transmission is "L."

Applications:

AX4N


The AX4N is an improved version of the basic AXOD, and is more reliable. This transaxle shifts non-synchronously (as indicated by the "N" in AX4N) resulting in improved shift quality over the previous AX4S. It was used in the 1996-up Taurus SHO models, but also found its way into some 1994 and 1995 Vulcan-powered models. It was standard on Duratec-powered models. It became standard with both engines in 2003. It was renamed the 4F50N in 2001. Applications:

The data plate code is "X."

Reliability issues

Earlier AXOD and AXOD-E models have a poor reliability record due to internal lubrication problems. These were mostly smoothed out by 1995. These transmissions require fluid changes every 30,000 miles to maximize service life.

Intermediate clutch failures resulting in poor 1-2 shifts or slipping are common on all AX family members.

Failure of the "Neutral to Drive Accumulator" causes hard shifts into a drive gear (R, OD, D, 1). from "N" or "P". This can become quite violent. Reason for this part's failure: Piston stuck, seals or springs—damaged, missing. Correction for this problem: Check for damage. Replace as required (located inside the transmission, recommended that a transmission shop do the repair, but a full rebuild of the transmission is NOT required).

See also

External links

Personal tools