Difference between revisions of "Mazda R360"

From Ford Wiki
Jump to navigation Jump to search
m (1 revision)
m (Robot: Automated text replacement (-\[\[.{2}:[^:]+\]\] +))
Line 66: Line 66:
[[Category:1960s automobiles]]
[[Category:1960s automobiles]]
[[Category:Vehicles introduced in 1960]]
[[Category:Vehicles introduced in 1960]]
[[pt:Mazda R360]]
[[fi:Mazda R360]]

Latest revision as of 06:45, 4 February 2009

Mazda R360
1960 Mazda R360 coupe
SuccessorMazda P360
Classkei car
Body style(s)2-door sedan
LayoutRR layout
Engine(s)356 cc V-twin
Wheelbase1760 mm (69.3 in)
Length2980 mm (117.3 in)
Width1290 mm (50.8 in)
Curb weight380 kg (838 lb)
ManualsService Manual
Mazda B360
SuccessorMazda E360
Classpickup truck
LayoutFR layout
Engine(s)356 cc V-twin
358 cc I4
577 cc V-twin
ManualsService Manual

The R360 was Mazda's first real car - a two-door, two-seat coupé. Introduced in 1960, it featured a short 69 inch (1753 mm) wheelbase and weighed just 838 lb (380 kg). It was powered by a rear-mounted air-cooled 356 cc V-twin engine putting out about 16 hp (12 kW) and 16 ft·lbf (22 Nm) of torque. The car was capable of about 52 mph (84 km/h). It had a 4-speed manual or two-speed automatic transmission. The suspension, front and rear, was rubber "springs" and torsion bars.

Within a few years of introducing the R360, Mazda had captured much of the lightweight (kei car) market in Japan. It was augmented by the Mazda P360 "Carol" 2+2 in 1962, as well as a convertible version in 1964. Production of the R360 lasted for six years.

B360 Pickup

The B360 was a pickup truck bodystyle based on parts of the R360 coupé. It used the same 356 cc engine, but mounted it in front with rear wheel drive. Like most pickups, it used a rigid rear axle and leaf spring suspension. The engine was replaced with the Carol's 358 cc I4 in 1964, and the B360 was replaced by the Mazda E360 in 1967.

A larger B600 pickup was introduced for the export market. It used a 577 cc version of the V-twin.