Autozam AZ-1

From Ford Wiki
Jump to navigation Jump to search
Autozam AZ-1 (PG6SA)
Autozam AZ-1
Parent companyMazda
Also calledSuzuki Cara (PG6SS), Mazda AZ-550
ProductionAZ-1 - October 1992–1995 4,392
Cara - 1993–1995 531
ClassKei car
Body style(s)2-door coupé
PlatformFRP body on Steel chassis
Engine(s)F6A 657 cc I3,
DOHC 12v turbo
Transmission(s)5-speed manual
Wheelbase2,235 mm (88.0 in)
Length3,295 mm (129.7 in)
Width1,395 mm (54.9 in)
Height1,150 mm (45.3 in)
Curb weight720 kg (1,587 lb)
RelatedMazda Carol
DesignerTatsumi Fukunaga (Suzuki RS/3)
Toshiko Hirai (Design leader)
ManualsService Manual

The Autozam AZ-1, known as the framecode PG6SA, is a mid-engined two-seat sports kei car, designed and manufactured by Suzuki but sold by Mazda under its Autozam brand. It debuted in October 1992 until production ceased in 1994, and was perhaps most noted for its gullwing doors. Power came from the same Suzuki-sourced 657 cc turbocharged engine used by the Mazda Carol that produced 64 PS (47 kW) at 6500 rpm and 85 N·m (63 ft·lbf) at 4000 rpm. Suzuki produced its own badge engineered version named the Suzuki Cara (PG6SS).

Prototype versions

Suzuki prototypes

The proposal for the AZ-1 goes as far back as 1985 when Suzuki created the Suzuki RS/1 as a midship sports car project for volume production .[1] Suzuki went as far to design the car for the Tokyo Motor Show more than just a design exercise, they designed the car to be functional with a front/rear weight distribution of 45:55.[2] powered by a 1.3 liter G13A engine from the Cultus.[1]

This was followed up by the Tatsumi Fukunaga designed RS/3, unveiled for the 1987 Tokyo Motor Show, retaining many of its design features of the predecessor but many of its design features were worked on to meet Japanese safety regulations as well as being a practical sports car. Unfortunately, the project was abandoned in favor of the roadster project they had been working on, named later as the Cappuccino.[3]

Mazda's design team, led by Toshiko Hirai, who was also responsible for the MX-5,[4] took over the design project, despite having a limited budget and capacity.

Mazda prototypes

The redesigned cars, constructed in tube frame with floors and bulkheads constructed from aluminium honeycomb, clad in three different bodystyles constructed in fibreglass. The cars were constructed around the Kei car regulation of the time (maximum length 126 inches (3,200 mm), maximum engine capacity 550 cc), until this was changed for the following March, hence its model name, AZ-550 Sports.[5]

First introduced at the 1989 Tokyo Motor Show as the AZ-550[6] with three versions. First one of these, the Type A was a red sports car with pop-up headlights, front air vent and a distinctive Ferrari Testarossa inspired side strakes but most distinctive of all design features were the gull-wing doors.[7]

Type B, themed as "High-tuned pure sports",[7] was inspired by the trends in the tuning industry and in current concept car design, featuring greenhouse pyramid roof without a rearward sweep to the C-pillar. It had a racing car inspired interior, unlike Type A, it was aiming for the rough and spartan look and was the only model that a more conventional forward door hinging.[7] It featured a pair of bulging headlamps and incorporated dual mufflers.[7][8]

Type C, had a more distinctive body design as it was inspired by Mazda's Group C sports prototype racers, incorporating its signature colour scheme of blue on white and its number it bore at the 24 hours of Le Mans.[7] Featuring a bigger air intake than the former two, venting to the forward-positioned radiator and exits it along the front rim of the cowl. There are many design cues typical to an endurance racer such as the wing mirror and BBS style brake-cooling wheel discs. Compared to the Type B, this version was far more spartan in comparison[9]


As the cars were well received by the visiting public and the motoring press, Mazda executives decided on production of the car. Although Type C was the better received of the three, it was Type A that was given the greenlight by executives as they believed that it would be the model that would become the most commercially accepted by the buying public of them all.[7] The Type A would only receive a minor design alteration prior to production as the pop-up was dropped in favour of the fixed unit, purely for structural rigidity reason.[7] The front air vent was the other design alteration made to the car prior to production.

The car took three years to get into production as the engineering team changed the car's internal skeleton frame to steel to allow for further rigidity.[4]

Much of the development work was in the United Kingdom despite it was never intended to be sold outside Japan.[10]


The car was made available to the buying public on September 1992, with two colour options, Siberia Blue and Classic Red, both came with Venetian Gray lower panels. Each cars were sold through the Autozam dealer network in Japan.[11]

Unfortunately by the time car came into production, the recession in Japan had just came into force. Selling for 1,498 million ¥ (the equivalent of $12,400), it was slightly less than a Eunos Roadster, but marginally higher than its competitor, the Honda Beat selling at 1,388 million ¥[12] and the Suzuki Cappuccino at 1,458 million ¥,[13] the AZ-1 was considered to be too expensive and too cramped, both for a kei car, the car failed to sell within its target of 800 per month, even in the midst of an economic recession, production of the car ended after the following year, but Mazda had plenty of stocks to shift off.[14]

With the total production of 4,392 over a year, plus 531 for the Cara version (mentioned later in the article) to 28,010 to the Cappuccino[15] and 33,600 for the Beat,[16] both with production reaching into the latter half of the 1990s; this makes the AZ-1 the rarest of the kei sports car.

Alternative versions

In a bid to shift unsold stocks, Mazda made effort to produce special versions. First one was the Type L option, featuring an enhanced audio system, including a sub-woofer at the boot space. There was no exterior changes made to the car.[14]


Mazda also introduced the Mazdaspeed version to reflect on parts that were available for the car, the A-spec, the body kit features an enhanced bonnet, front spoiler and rear wing. Unlike the production version, the car came in an all-red or blue body colour. It also came with a host of options including shock absorber with sports spring set, strut bars for the front and rear, mechanical LSD, enhanced air filter, stainless steel and ceramic muffler. It also came with its own brand of alloy wheels as opposed to the production's steel wheels.[17]

M2 1015

For 1994, There was also the M2 1015 by M2 Performance,[14] part of M2 Incorporated, part of Mazda which also includes a dedicated design studio[18] and a car dealership in Tokyo.[19]

The most distinguishing part of the car is the front fog lights incorporated into the bonnet, all new front bumper and rear spoiler. The car came in three different colours, white, black and silver, like the Mazdaspeed version, the car came entirely painted.[14]

Fifty were to be produced[19] and sold by the M2 dealer, but only managed to sell almost half of its stocks, the dealer covered its loss by selling the body parts individually.[14] A genuine "M2 1015" can be identified by the rear emblem stating the version name.[14]

Suzuki Cara

See in Japanese wikipedia

The AZ-1 was also sold by Suzuki as the Cara, with only minor detail changes including the addition of fog lamps.

Other versions

Although the M2 1015 was the only version sold by the dealer, M2 also created other versions purely for show purposes and to test market their cars.

M2 1014 was a one-off off road inspired car built for the 1993 Tokyo Motor Show with design cues coming from the Lamborghini Cheetah.[20] M2 1015A is a rally inspired featuring auxiliaries of a rally car including a pair spotlights detached on the bottom of the bonnet.[20] The M2 1015B incorporated a detachable top roof, instead of being constructed of glass, it was constructed in plastic.[20]

Cult tuning company and rotary specialist, RE Amemiya produced another one off example for the Tokyo Auto Salon, influenced by the AZ-550 Type-C but longer and wider, incorporating a 20B three rotor Wankel engine, mounted longitudinally. The only part of the car that has traces of the original AZ-1 is the gullwing door.[20]

There was also a one off version built in 1996 named Abarth Scorpione[14] commissioned by Shiro Kosaka, a renowned collector of Abarth sports cars, with numerous design cues from its genuine and rare namesake.[21] The car is entirely rebodied at a cost of ¥1 million for the body alone, plus another ¥1 million for painting and fitting.[14] The genuine car in fact feature a conventional opening doors. For further details refer to this article (Japanese)


An AZ-1 was built for the Metal Heroes tokusatsu series Blue SWAT. The car, known as CV-1 Striker EX was driven by team leader Shou Narumi[22] The car, distinctive by the roll cage mounted outside the car, featured a combination titanium alloy, Tungsten steel and carbon fiber for body armour and features bulletproof glass. Its gas turbine engine propel the car up to 312km/h.[23]


External links

  1. REDIRECT Template:Ja icon
  1. REDIRECT Template:Ja icon
  1. REDIRECT Template:Ja icon